Published in Energy, 2016
Recommended citation: J. H{\ae}rvig, K. S{\o}rensen, T. Condra, "Guidelines for optimal selection of working fluid for an organic Rankine cycle in relation to waste heat recovery." Energy, 2016. http://dx.doi.org/10.1016/j.energy.2015.12.098
Published in Powder Technology, 2017
Recommended citation: J. H{\ae}rvig, U. Kleinhans, C. Wieland, H. Spliethoff, A. Jensen, K. S{\o}rensen, T. Condra, "On the adhesive JKR contact and rolling models for reduced particle stiffness discrete element simulations." Powder Technology, 2017. http://dx.doi.org/10.1016/j.powtec.2017.07.006
Published in International Journal of Heat and Mass Transfer, 2017
Recommended citation: J. H{\ae}rvig, K. S{\o}rensen, T. Condra, "On the fully-developed heat transfer enhancing flow field in sinusoidally, spirally corrugated tubes using computational fluid dynamics." International Journal of Heat and Mass Transfer, 2017. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2016.10.080
Published in International Journal of Multiphase Flow, 2018
Recommended citation: J. H{\ae}rvig, K. S{\o}rensen, T. Condra, "Early stages of agglomeration of adhesive particles in fully-developed turbulent pipe flows." International Journal of Multiphase Flow, 2018. https://doi.org/10.1016/j.ijmultiphaseflow.2018.04.017
Published in International Journal of Heat and Mass Transfer, 2019
Recommended citation: A. Bjerg, K. Christoffersen, H. S{\o}rensen, J. H{\ae}rvig, "Flow structures and heat transfer in repeating arrangements of staggered rectangular winglet pairs by Large Eddy Simulations: Effect of winglet height and longitudinal pitch distance." International Journal of Heat and Mass Transfer, 2019. https://doi.org/10.1016/j.ijheatmasstransfer.2018.11.015
Published in International Journal of Heat and Mass Transfer, 2020
Recommended citation: Turo V{\"{a}}likangas, Jakob H{\ae}rvig, Heino Kuuluvainen, Miikka {Dal Maso}, Petteri Peltonen, Ville Vuorinen, "Deposition of dry particles on a fin-and-tube heat exchanger by a coupled soft-sphere DEM and CFD." International Journal of Heat and Mass Transfer, 2020. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2019.119046
Published in International Communications in Heat and Mass Transfer, 2020
Recommended citation: J H{\ae}rvig, H S{\o}rensen, "Natural convective flow and heat transfer on unconfined isothermal zigzag-shaped ribbed vertical surfaces." International Communications in Heat and Mass Transfer, 2020. https://doi.org/10.1016/j.icheatmasstransfer.2020.104982
Workshop, AAU, Aalborg Campus, 2017
Scientific paper writing is a one-day workshop where students are taught the jagon of scientific paper writing.
Workshop, AAU, Aalborg Campus, 2018
Scientific abstract writing is a one-day workshop where students are taught the jagon of scientific abstract writing. The purpose of this workshop is to prepare students to submit their abstract for our annual Conference for Energy Students (CES) conference.
Workshop, AAU, Aalborg Campus, 2018
Scientific paper writing is a one-day workshop where students are taught the jagon of scientific paper writing. In 2018 the workshop is split into two workshops - one focusing on abstract writing and one focusing on scientific papers.
Undergraduate course, AAU, Aalborg Campus, 2019
Dimensional analysis is part of the undergraduate course Flow Machines in which various turbomachines are introduced and analysed. The course is taught together with Anna L. Jensen.
Undergraduate course, AAU, Aalborg Campus, 2019
Heat transfer is an undergraduate course with focus on more advanced topics in heat transfer. The course is taught together with Torsten Berning.
Workshop, AAU, Aalborg Campus, 2019
Scientific abstract writing is a one-day workshop where students are taught the jagon of scientific abstract writing. The purpose of this workshop is to prepare students to submit their abstract for our annual Conference for Energy Students (CES) conference.
Workshop, AAU, Aalborg Campus, 2019
Scientific paper writing is a one-day workshop where students are taught the jagon of scientific paper writing.
Undergraduate course, AAU, Aalborg Campus, 2020
Dimensional analysis is part of the undergraduate course Flow Machines in which various turbomachines are introduced and analysed. The course is taught together with Anna L. Jensen.
Undergraduate course, AAU, Aalborg Campus, 2020
Heat transfer is an undergraduate course with focus on more advanced topics in heat transfer. The course is taught together with Torsten Berning.
Workshop, AAU, Aalborg Campus, 2020
OpenFOAM Days is an initiative to boost the OpenFOAM knowledge of 1st and 2nd year graduate students. The two-day workshop introduces students to OpenFOAM as a CFD tool and gives them hands-on experience in using OpenFOAM. The workshop runs until late evening and is concluded with pizza and talks from various local companies on how they use OpenFOAM in their daily workflow. The workshop is taught together with Anna L. Jensen.
Workshop, AAU, Aalborg Campus, 2020
Scientific abstract writing is a one-day workshop where students are taught the jagon of scientific abstract writing. The purpose of this workshop is to prepare students to submit their abstract for our annual Conference for Energy Students (CES) conference.
Workshop, AAU, Aalborg Campus, 2020
Scientific paper writing is a one-day workshop where students are taught the jagon of scientific paper writing.
Undergraduate course, AAU, Aalborg Campus, 2021
Dimensional analysis is part of the undergraduate course Flow Machines in which various turbomachines are introduced and analysed. The course is taught together with Anna L. Jensen.
PhD course, AAU, Copenhagen Campus, 2021
Course in Open-source Computational Fluid Dynamics is a course for PhD students. The two-day course introduces students to OpenFOAM as a CFD tool and gives them hands-on experience in using OpenFOAM. The course is run together with Johan Rønby.
PhD course, AAU, Copenhagen Campus, 2021
Course in Open-source Computational Fluid Dynamics is a course for PhD students. The three-day course introduces students to more advanced aspects of OpenFOAM as a CFD tool and gives them hands-on experience in using OpenFOAM. The course is run together with Johan Rønby and Kristian Christoffersen.
Undergraduate course, AAU, Aalborg Campus, 2021
Heat transfer is an undergraduate course with focus on more advanced topics in heat transfer. The course is taught together with Torsten Berning.
Workshop, AAU, Aalborg Campus, 2021
OpenFOAM Days is an initiative to boost the OpenFOAM knowledge of 1st and 2nd year graduate students. The two-day workshop introduces students to OpenFOAM as a CFD tool and gives them hands-on experience in using OpenFOAM. The workshop runs until late evening and is concluded with pizza and talks from various local companies on how they use OpenFOAM in their daily workflow.